When you hook up your home theater system, it is important to connect each component properly. The first component that you will be connecting will be the audio receiver or amplifier. If you have an old-school receiver that only has RCA cables or speaker wire outputs, you are limited to hooking up your speakers with either bare wire or banana plugs. If you have a newer receiver that supports speaker cable, there are some advantages of using this type of cable to hook up your home theater system.
Using speaker cable is probably the easiest and most reliable way to hook up your home theater system. This is because speaker cable can typically be run from the back of the receiver through walls and ceilings to reach each speaker without needing to cut any holes into the drywall. Speaker cable has a positive terminal and a negative terminal. The positive terminal on one end of the cable connects to the positive terminal on the speaker and then is connected to the negative terminal on the other end of the cable which then connects to the negative terminal on the speaker. With this method, it is easy to ensure that each connection is correct because all you need to do is make sure that all of the positives connect together and all of the negatives connect together. In addition, banana plugs are not required for
If you are planning on getting a home theater, or if you already have one and are using the TV speakers, then you must consider upgrading your system. While there is no single right answer when it comes to components, there are some basic rules when installing a home theater in your house.
You can choose any number of components and configurations, but I will try to focus on the most common ones and the ones that people usually ask me about. If you want to get a home theater system, then you should always remember that this is a long term investment and over time you will be able to upgrade parts of it.
To start off with your home theater setup, you would need to decide how many speakers you want in your room. For the average room size, at least two speakers are needed so that you can get adequate surround sound for movies and music. If you want to go for more than two speakers, then it is recommended that you install them in pairs so that they can produce stereo sound without too much distortion.
Acquiring a new home theater system can be quite the task. With all of the options out there, it is easy to be overwhelmed. The purpose of this guide is to help you make informed decisions about your home theater system.
The first area we will focus on is the receiver, which acts as the central control center for your system. The receiver routes audio and video from various source components to your television and speakers. Receivers come in various shapes, sizes and power ratings depending on your needs. It is important to choose a receiver that will fulfill your needs now and allow for future upgrades. This begins with choosing the right number of channels (e.g., 5.1 channels). Each speaker (left, center, right, left surround, right surround) requires its own channel — except for the subwoofer which receives low frequency information from all channels. If you plan on adding additional speakers in the future (e.g., a second subwoofer or rear surrounds), it is recommended that you purchase a receiver that supports at least 7.1 channels or greater.
One of the most important features of a receiver is amplifiers. Low level signals are received by the receiver through RCA (red and white) connections or optical/digital connections and are
If you’re thinking of setting up a home theater system, you’ve probably heard or read about the importance of having an AV receiver. That’s true, but what is an AV receiver? Why do you need one?
In this guide, we’ll answer these questions and more. You’ll learn how to connect your home theater components to a receiver, how to choose the right speakers for your space, and other important information.
What Is an AV Receiver?
An AV receiver is the core of your home audio system. It connects to all the other components in your entertainment center and amplifies audio content so that it can be played through your speaker system.
An AV receiver is essentially a box that contains preamplifiers, power amplifiers, equalizers, and other electronic circuitry for audio processing. The term “AV” stands for “audio/video,” so most receivers contain video processors as well as audio processors. This means you can use one device to send both audio and video signals to multiple speakers and televisions throughout your home.
If you have a home theater, you probably already have a receiver and speakers. If not, this is the place to start.
Receivers can be very confusing because they are chock full of features that most people will never use. In this article I will outline the bare essentials and recommend a few models that are easy to setup and sound great.
The most important thing to look for in a receiver is support for HDMI 1.3 (High-Definition Multimedia Interface) inputs and outputs. This is not so much because of the great video quality but the audio options it gives you. Specifically if you want 5.1 or 7.1 surround sound through your speakers. You’ll also need at least three HDMI inputs on your receiver; one for your Blu-ray player, one for your cable or satellite box, and another for any other device such as an Apple TV or Wii U that you might want to connect in the future (unless you plan on buying a separate receiver for each).
If you get a receiver with HDMI inputs but no HDMI outputs there’s no need to worry as much since you won’t be able to get 5.1 surround sound from your cable box but all of your other devices will still work perfectly fine with it (though it
When you hook up a home theater, you’re simply connecting all the component parts together so they work as one. While each component may need its own instructions to hook it up, there are some general guidelines to follow when hooking up a home theater system.
The Receiver
The receiver is the “hub” that all of the components plug into. It has inputs for everything and outputs to the TV and speakers. Essentially, it processes the audio and video information from whatever you’re watching or listening to (TV show, DVD, streaming internet) and then sends it to the TV/speakers so you can hear/see it.
The Broadband Connection
This is usually your cable or DSL modem. It plugs into your wall jack, and then plugs into your router. The router is wired or wirelessly connected to your various devices (computers, printers, receivers). The broadband connection brings in all of your content from the web (Netflix, YouTube) via your home network. If you don’t have a broadband connection, you’ll need to get one!
The TV
Your TV receives its incoming video signal from your receiver via an HDMI cable. You can also use component cables if your equipment doesn’t have an HDMI port. Since HDMI is digital and carries
If you imagine a typical home theater system, it probably has several main components: a TV (or projection screen), an audio/video receiver, a DVD player and perhaps a VCR. There will also be other pieces of equipment like a CD player, satellite or cable TV receiver, game console and surround sound processor.
The A/V receiver is the central piece of the system. It receives the signals from all the various devices and channels them to wherever they need to go. The receiver sends video signals to the TV and audio signals to your speakers. If you own more than one TV, it can send different types of signals to each of them and even control which one is currently active.